Use tractor winch cable size according to the transmission, to adjust the height of the front and rear tractor cutter grinding roller in order to hold the cable, when adjusting loosen the thumbscrew hand, move up and down tugboat height, and then tighten the thumbscrew hand. Cable according to size of the transmission, with a hand crank to loosen tension screw counterclockwise, loosen the rubber track in place, so that the desired delivery into the cable. Conveyor use before comprehensive inspection of the components required connection bolts and nuts are loose, loose if need tightening, and check the open gear grease lubrication on whether the place, and catch up on grease, view the roller lifting situation and the tractor After adjusting the fixed cutter grinding machine and tractor winch load operation for five minutes in order to check the whole work. Single tractor winch needs to be fixed on the ground, adjust the roller height, and then release the rubber track, rubber track will be placed within the cable, turn the tension screw clockwise with a wrench grip cable, start the motor, tractor winch it You can transfer operations. Because a large section of the cable used in tandem heavy weight, single use is difficult to meet the construction requirements, then the need to cooperate in the tractor, the tractor winch multiple series. Stop cable in the tractor into the first tractor traction when towing winch, the cable is clamped between the rubber track, and at the same time start the tractor and tractor winch. Stop cable into the second tractor traction winch, the cable is clamped between the rubber track, and then start the tractor and two tractor winch. Stop cable into the third conveyor traction, the cable is clamped between the rubber track, and then start the tractor and three tractor winch. Repeat the action until the cable into the final tractor winch, then you can drag and drop the construction work of the whole line cable. To ensure that each machine synchronous operation, the user must be configured according to the specific construction program corresponding synchronization power control cabinet, synchronous power control panel is divided into sub-total control boxes and control boxes, control box can control a total ten sub-control box, a sub-control Box control a tractor winch for the convenience of users, each control box has enough power outlets to connect master control box and sub-control box and tractor winch between the control system to ensure the safe use, each stop switches are able to make the entire line drop stop operations, so the principle of sub-control total stop security settings on a sub-control box and total control box.